22mm ID x 37mm OD non-drive seal with stepped back and 24mm ID x 37mm OD drive side seal

Replacment BB seal set for SRAM GXP Bottom Brackets running Enduro Bearing Kits. The aluminum center of the non-drive side seal has a stepped back that meshes with the face of Enduro bearings that have an inner race extender installed. The outside diameter of both seal edges is 37mm (for use on tapered GXP bottom bracket cups and BB92 and BB86 cups). Replacement wave spring available separately.

NOTE: Sold in sets of 1 drive side and 1 non-drive side seal