Welcome to REAL WORLD CYCLING    

Our SEARCH BAR is optimized to find what you need quickly.  Enter the name of your bike frame, the first few numbers of a bearing, or description of any part!  

RWC Shock NB Kit, 15.75mm
$28.00

This kit is designed for 8mm shock hardware.  To use this kit with 6mm bolts, please add this item to your cart: 8 x 6mm Reducing Sleeve Our NEEDLE BEARING CONVERSION KITS are a new, better way of doing things. Our top quality hardened steel needle bearing takes the place of the DU bushing. The needle bearing is matched with a hardened, polished inner ring (axle) that, when used with the supplied spacers, is a perfect fit between the rocker arms or frame mounts. Until your shock is riding on bearings, you will never take advantage of its true capabilities.

The breakthrough performance and popularity of our needle bearing kits has inspired some cheap knock-off kits. Only our kits include up to 4 hardened bearing steel axles of varying Outside Diameters so that you get a custom fit regardless of slight variations in your shock eyelet bore.

Shock bores typically run between 15.01mm and 15.03mm. As the needle bearing assembly gets pressed into the shock eyelet, the cup holding the rollers gets compressed, which affects the Inside Diameter of the bearing. These variations in bearing Inside Diameter require corresponding variations in axle Outside Diameter in order to have a proper fit. Too tight a fit results in binding, while too loose a fit results in excess play. With our kit, you are guaranteed a custom fit and optimum performance.

SKU: NBKRWC1575

Out of Stock
  • With all the engineering that has gone into modern day mountain bike suspension systems, it's strange that more attention has not been paid to the mounting of the actual shock. The next time you service your shock, take a moment after removing the top of the shock from the linkage to slowly rotate the shock fore and aft on the lower pivot. Note all the friction taking place. Remove the shock and extract the reducers. Not only will you find wear inside the DU bushing, but you'll likely find scoring on the outside surfaces of the shock spacers as well, indicating the hardware is rotating where it's not supposed to. Our NEEDLE BEARING CONVERSION KITS are a new, better way of doing things. Our top quality hardened steel needle bearing take the place of the DU bushing. The needle bearing is matched with a hardened, polished inner ring (axle) that, when used with the supplied spacers, is a perfect fit between the rocker arms or frame mounts. --Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing --NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 15.75mm --Works with your 6mm OR 8mm BOLT (includes adapter sleeve) --Teflon spacer/seals (INCLUDES PARTS FOR ONE SHOCK "EYE")
  • --Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing --NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 15.75mm --Works with your 6mm OR 8mm BOLT (includes adapter sleeve) --Teflon spacer/seals (INCLUDES PARTS FOR ONE SHOCK "EYE")

Language Picker

Popular languages in United States

  • English

Other languages

  • Deutsche
  • svensk
X

Your Cart

0
My Cart

No items in your cart